Asbestos is the single most regulated substance in the United States of America. It
is a mineral, mined from the earth like any other common ore. It is relatively
harmless until it is extracted from its core rock matrix and made friable (reduced to
a powder by hand pressure).  This manipulated form of the mineral was placed in
building materials and was used in buildings, schools, businesses, homes and
industrial buildings throughout the world.
Nordstrom Contracting & Consulting, Corp. is contracted to perform building
material inspections for asbestos, project design activities prior to asbestos
material abatement under the Asbestos Hazard Emergency Response Act
(AHERA) regulations, generate AHERA management plans for schools and other
clients, and routinely perform project supervision including air monitoring during all
asbestos abatement activities.


The Environmental Protection Agency (EPA) National Emissions Standards for Air
Pollutants (NESHAPs) regulation for demolition or renovation as it pertains to
asbestos stipulates that building owners must inspect for the presence of asbestos
containing building materials (ACBMs) prior to the start of demolition or renovation
activities that would cause these materials to be made friable.
The OSHA General Industry Standard 29 CFR 1910.1001 requires building owners
to identify asbestos containing- material (ACM) in their buildings and inform
building occupants of their locations and hazards.
School Districts (public and parochial kindergarten through twelfth grade) are
expected to comply with the Asbestos Hazard Emergency Response Act of
1986-87, as amended. Within this regulation, each school is required to have
inspected all buildings owned by the district that are used for school processes.
They are required to have periodic surveillance and tri-annual re-inspections by
an unaffiliated third- party inspector.
All inspections should be made by asbestos inspectors accredited by an EPA
approved course for building inspectors.
An inspection will identify all suspect asbestos containing materials within a
building. NCC uses EPA approved protocols for inspection including homogeneous
area descriptions and thorough analysis. Through bulk sampling and analysis for
asbestos content, NCC can provide an accurate account of the ACM problems (or
lack thereof) in a facility. NCC can generate asbestos management plans or
operations and maintenance programs to best deal with the existing material in
place or can provide project design services or air monitoring and project
supervision during the abatement of problem areas. Call NCC today for
consultation on the presence of ACM in your building or in building materials


Asbestos abatement project design services are required, for school projects
exceeding 260 linear feet or 160 square feet of material.  These projects must be
designed by accredited project designers.
Project design is the process of assessing the client's needs, identifying the scope
of removal work, generating asbestos abatement specifications, securing
abatement contractors through a bid process and assisting the client in selecting
an approved contractor. This all should be done keeping the Federal, State, Local
and Municipal (not to mention client) requirements in compliance.
It is a daunting task. One that NCC has routinely handled. Let us help you wade
through project pitfalls, helping keep the project on schedule, reduce liability, and
remain under budget and in compliance.


Liability for occupant and employee protection under OSHA regulations can be
reduced by having an unbiased consulting firm provide air fiber monitoring and
project supervision.  This is conducted to assure that no individuals are exposed
during asbestos abatement above regulatory limits. NCC has a full staff of NIOSH
582 equivalency trained hygienists, ready to perform monitoring in compliance with
the NIOSH 7400 method for asbestos monitoring in air.  NCC also participates in
the AAR Program and the round-robin bulk sample analysis programs as
administered by the AIHA.
Project Supervision is a vital aspect of any project.  Its goal would be to keep all
parties involved in compliance with all applicable asbestos regulations.  This
aspect is typically provided to air monitoring projects unless stipulated by
contractual arrangement.  Air monitoring, because of the latent effects of asbestos
exposure is a necessary part of employee protection and should be performed
during all asbestos removal projects.
More Info- asbestos Services
Contracting &
Consulting, Corp.
Back to services page
Nordstrom Contracting & Consulting, Corp.
9 Ingalls St
Suite 41
Nyack, NY 10960
Office Phone: (914) 269-4343 - Fax: (914) 269-4344